The transporter tank is a kind of equipment that can replace the manpower to carry out the cargo, it can be used alone, or can be used together. When working, it can also be used with jack, hand hoist, steel wire rope, lifting belt and other handling tools.

　　Handling tank car is widely used, such as factory equipment handling, warehouse cargo handling, heavy lifting, precision instrument handling, large mechanical equipment handling and so on can be used to handle the tank car.

　　When handling goods in the warehouse, if the traditional manual handling, not only low cost and efficiency is not high, so many manufacturers choose to use Longsheng straight tank truck save time and effort, and straight tank truck is equipped with a detachable turntable, turntable has a threaded hole, can be used to fix heavy objects, avoid slipping; The tank carrier in straight line strengthens the shaft processing, increases the wear resistance; Can be used in combination with multiple, can also be matched with steering handling small tank, as a guide car for steering handling; The wheel adopts reinforced PU rubber wheel, which does not damage the ground and increases the bearing coefficient, so the service life is longer.

　　Precautions for lifting and handling small tanks

　　1. The height of several handling tanks should be detected during joint handling operation, and the consistency of height should be ensured. If the height is inconsistent, you can add rubber pad and other large friction coefficient to compensate pad flat. Do not add slippery items.

　　2. Several handling tanks should be balanced weight distribution in the various handling vehicles to avoid uneven load between the removal vehicles. The specific configuration of the tonnage specifications and quantity of the removal vehicles is determined according to the specific heavy objects to be transported.

　　3. The tank should be moved slowly. Rapid travel not only poses a threat to the equipment and staff being carried, but also leads to the rapid heating of the wheel affecting the service life. If the transportation is too fast, possible security risks cannot be handled in a timely manner.

　　4. When handling several small tanks, it is particularly important to keep the direction of each wheel coordinated. Uncoordinated wheel movement will cause heavy objects to travel difficult, or not to travel, but also easy to damage other wheels, for the problem of the wheel should be replaced in time.

　　5. Check the wheels of the tank conveyer regularly. When it is found that the handling tank wheel rotation is not flexible or bearing clearance is large, loud noise should be replaced bearing; When the wheel is damaged, it should be replaced in time (steel wheels do not appear in this situation).

Next: The classification of fixtures and the components of fixtures

Previous: Round steel tube clamp understand